E6000 Premium Clear Jewelry & Bead 29.5ml

BONDS PLASTICS OTHER ADHESIVES WISH THEY COULD!  E6000 PREMIUM Jewelry & Bead is perfect for securing knots and permanently attaching most any type of stone, gem, crystal or bead to findings and base metal, silver, copper, gold jewelry pieces and polymer clay. It bonds to even more substrates! Easily adheres to plastic beads and objects made of acrylic (Lucite®, Plexiglas®, etc) and ABS used for jewelry making. Cures clear with extreme flexibility and is waterproof! ACCEPT. NO. SUBSTITUTES.

• Includes 4 precision tips
• Extreme flexibility
• Waterproof
• Dries clear/Paintable
• Washer/Dryer safe
• Permanent bond
• Withstands extreme temperatures

INSTRUCTIONS

Follow these step-by-step directions when using E6000 PREMIUM Jewelry & Bead:

1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2. Puncture seal in neck of tube using a precision tip. Replace cap. Screw precision tip into top of tube cap. Replace with fresh tip as needed.
3. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). Fully cured adhesive withstands temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
4. Apply directly to each surface to be bonded. Allow to partially cure, approximately 2 minutes, before mating surfaces.
5. When finished, unscrew precision tip and replace it with the provided plug. Allow 24 hours for curing. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
6. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

NOTE: May damage finished surfaces. Avoid such contact until completely cured. Not recommended for use on Styrofoam™ or paper products. Not recommended for any items that come into contact with food, drinking water or animals. Do not dry clean.

FAQ

How long does E6000 Premium take to dry?
E6000 Premium sets in approximately 20 minutes, allow 24 hours for curing. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.

What makes E6000 Premium different than other adhesives?
E6000 Premium is formulated with enhanced adhesion promoters to provide outstanding performance as expected – but this powerhouse adheres to plastics that other adhesives only dream of being able to bond without fail!

Is E6000 Premium washer and dryer safe?
Yes.

What is the best way to clean-up E6000 Premium?
Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.