E6000 Premium Clear 59.1 ml

BONDS PLASTICS OTHER ADHESIVES WISH THEY COULD! E6000 PREMIUM forms permanent bonds to the most difficult items such as plastics used in 3D printing, polycarbonate, PVC, ABS, acrylics, polystyrene, fiberglass, etc., while also providing super strength bonds to other materials such as wood, metal, fabric, ceramic, glass, cement, clay, and more! Its unique formula is the perfect adhesive for hobby/crafts, home improvement/DIY projects, auto repairs, industrial applications and so much more! ACCEPT. NO. SUBSTITUTES.

• Extreme flexibility
• Withstands extreme temperatures
• Waterproof
• Dries clear/Paintable
• Washer/Dryer safe
• Permanent

INSTRUCTIONS

Follow these step-by-step directions when using E6000 PREMIUM:

Read directions and test small area before use.

1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2. Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). Fully cured adhesive withstands temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
3. Apply directly to each surface to be bonded. Allow to partially cure, approximately 2 minutes, before mating surfaces.
4.  Allow 24 hours for curing. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

NOTE: May damage finished surfaces. Avoid such contact until completely cured. Not recommended for use on Styrofoam™ or paper products. Not recommended for any items that come into contact with food, drinking water or animals. Do not dry clean.

FAQ

How long does E6000 Premium take to dry?
E6000 Premium sets in approximately 20 minutes, allow 24 hours for curing. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.

What makes E6000 Premium different than other adhesives?
E6000 Premium is formulated with enhanced adhesion promoters to provide outstanding performance as expected – but this powerhouse adheres to plastics that other adhesives only dream of being able to bond without fail!

Is E6000 Premium washer and dryer safe?
Yes.

What is the best way to clean-up E6000 Premium?
Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.