HEAT Press Batting Together: 3/4"x 10 Yards, (White) Cloth Tape

HEAT Press Batting Together: 3/4” cloth tape that will fuse two edges of batting together. It’s soft, it is thin, it stretches, it is needle easy for hand or machine quilting.

 Used to fuse batting-fabric together to fit a specific size, to enlarge or reinforce. The HEAT Press Batting Together comes in 1 ½" (Item #: 82479) and 3/4" (Item #: 92128) cloth tape on a 10 yard roll, will allow batting edges to be fused together with a soft fuse that stretches, eliminating the old pinning and stitching of extra batting pieces needed to fit a specific project. The product can be used on any batting fabric content.

•      Quilting
•     Reinforcement for stretch fabric
•     Backing for stretch fabric
•     Patch for stretch fabric
•     100% Made in the USA

Directions for using HEAT Press Batting Together:

•     Iron Settings are Most Important when applying tape. Irons with Teflon plates can use low cotton to fuse tape. Irons without a Teflon plate use the new instructions below.
•     Test your iron with tape and batting.
•  
• * 100% polyester batting... low setting (high synthetic) and use and up and down motion until the glue is set. You can use a low shot of steam to finish the fusible process holding the iron above the tape.
•  
•  Test all synthetic mixed battings ~ usually a wool setting works well.

You may find that the batting looks flat after application but when it cools the batting is fluffy again. With a large quilt batting 93" and adding more width, I use weights on either side of the batting to hold it in place.

•     Use and up and down motion with the iron as you place the tape for the first time on the batting edges.
•     When the tape is set in place then apply heat and you may use a little light steam to completely melt the glue backing.
•    You will find that the tape is soft, flexible, stretches and is easy needle ready for either hand quilting or machine quilting.
•     It’s FAST and EASY